What You Need to Know About Tone2 ElectraX VSTi v1.2.x64
Tone2 ElectraX VSTi v1.2.x64: A Powerful Synthesizer Plugin for Music Production
If you are looking for a versatile and flexible synthesizer plugin that can handle any kind of sound, you should check out Tone2 ElectraX VSTi v1.2.x64. This plugin is a four-layer synthesizer that offers 14 different synthesis methods, a huge modulation matrix, an advanced arpeggiator, a high-quality effects section, and a master section with a powerful sound engine. Whether you want to create fat basses, lush pads, sparkling leads, or complex soundscapes, Tone2 ElectraX VSTi v1.2.x64 can do it all.
Tone2 ElectraX VSTi v1.2.x64
In this article, we will show you what Tone2 ElectraX VSTi v1.2.x64 is, how to install and use it, how to create amazing sounds with it, and how to get the most out of it. We will also answer some frequently asked questions about this plugin.
What is Tone2 ElectraX VSTi v1.2.x64?
Tone2 ElectraX VSTi v1.2.x64 is a synthesizer plugin that can be used with any DAW (digital audio workstation) that supports VST or AU formats. It is compatible with both Windows and Mac operating systems, and it works in both 32-bit and 64-bit modes.
Features and benefits of Tone2 ElectraX VSTi v1.2.x64
Some of the features and benefits of Tone2 ElectraX VSTi v1.2.x64 are:
It has four independent synthesis layers that can be combined or split in various ways.
It offers 14 different synthesis methods, including virtual analog, FM, wavetable, phase distortion, sample playback, physical modeling, additive, resynthesis, vocoder, sync granular, fractal synthesis, ultra-saw, wave-shaping, and noise.
It has a huge modulation matrix with over 40 sources and over 50 destinations.
It has an advanced arpeggiator with over 1000 presets and a step sequencer.
It has a high-quality effects section with over 40 effects, including reverb, delay, chorus, flanger, phaser, distortion, filter, EQ, compressor, limiter, gate, bitcrusher, enhancer, stereo widener, and more.
It has a master section with a powerful sound engine that uses 64-bit precision and supports polyphony up to 1024 voices.
It has a user-friendly interface that can be resized, customized, and skinned according to your preferences.
It has a huge library of over 1300 presets and 3000 sounds that cover a wide range of genres and styles.
It has a low CPU usage and a fast loading time.
It has a lifetime free update policy and a friendly customer support.
How to install and use Tone2 ElectraX VSTi v1.2.x64
To install Tone2 ElectraX VSTi v1.2.x64, you need to follow these steps:
Download the plugin from the official website or from a trusted source.
Extract the zip file and run the setup.exe file.
Follow the instructions on the screen and choose the destination folder and the plugin format (VST or AU).
Copy the license file (electrax.t2k) to the same folder where you installed the plugin.
Launch your DAW and scan for new plugins.
Select Tone2 ElectraX VSTi v1.2.x64 from the plugin list and insert it on a track.
To use Tone2 ElectraX VSTi v1.2.x64, you need to understand its interface and its functions. The interface consists of four main sections: the layer section, the synthesis section, the effects section, and the master section. Each section has its own tabs, knobs, buttons, and menus that allow you to access different features and parameters. Here is a brief overview of each section:
Section
Description
The layer section
This section lets you select, edit, mix, and route the four synthesis layers of Tone2 ElectraX VSTi v1.2.x64. You can choose from 14 different synthesis methods for each layer, adjust the volume, pan, transpose, detune, glide, and phase of each layer, and apply filters, envelopes, LFOs, and modulations to each layer. You can also split or combine the layers in various ways using the layer mode buttons.
The synthesis section
This section lets you edit the sound of each layer in detail using the 14 different synthesis methods of Tone2 ElectraX VSTi v1.2.x64. You can access different tabs for each synthesis method, such as oscillator, wavetable, sample, FM, noise, etc., and tweak various parameters such as waveform, pitch, modulation, filter, envelope, LFO, etc. You can also import your own samples or wavetables into some of the synthesis methods.
The effects section
This section lets you apply over 40 high-quality effects to each layer or to the master output of Tone2 ElectraX VSTi v1.2.x64. You can access different tabs for each effect type, such as reverb, delay, chorus, flanger, phaser, distortion, filter, EQ, compressor, limiter, gate, bitcrusher, enhancer, stereo widener, and more. You can adjust the parameters of each effect, such as time, feedback, depth, rate, mix, drive, frequency, gain, threshold, ratio, etc. You can also modulate the effects using the modulation matrix or the LFOs.
The master section
This section lets you control the global settings and the output of Tone2 ElectraX VSTi v1.2.x64. You can access different tabs for the master settings, such as polyphony, pitch bend, velocity curve, MIDI learn, etc., and for the master output, such as volume, pan, EQ, limiter, etc. You can also access the sound browser and the wavetable editor from this section.
By using these sections and their features, you can create any kind of sound you want with Tone2 ElectraX VSTi v1.2.x64. You can also save your own presets and share them with other users.
How to create amazing sounds with Tone2 ElectraX VSTi v1.2.x64
Tone2 ElectraX VSTi v1.2.x64 is a very powerful and flexible synthesizer plugin that can create amazing sounds for any genre and style of music. However, to get the best results from this plugin, you need to know how to use its features and functions properly. In this section, we will show you some tips and tricks on how to create amazing sounds with Tone2 ElectraX VSTi v1.2.x64.
The four synthesis layers of Tone2 ElectraX VSTi v1.2.x64
One of the most important features of Tone2 ElectraX VSTi v1.2.x64 is that it has four independent synthesis layers that can be combined or split in various ways. Each layer can have its own synthesis method, sound source, filter, envelope, LFO, modulation, effect, and output settings. This means that you can create complex and rich sounds by layering different sounds together.
To use the four synthesis layers of Tone2 ElectraX VSTi v1.2.x64, you need to do the following:
Select a layer by clicking on its name (A, B, C, or D) in the layer section.
Choose a synthesis method for the layer by clicking on the synthesis mode button in the layer section.
Edit the sound of the layer by using the synthesis section and its tabs.
Apply a filter to the layer by using the filter knob and the filter type menu in the layer section.
Apply an envelope to the layer by using the envelope knobs and the envelope shape menu in the layer section.
Apply an LFO to the layer by using the LFO knobs and the LFO shape menu in the layer section.
Apply a modulation to the layer by using the modulation matrix in the layer section.
Apply an effect to the layer by using the effects section and its tabs.
Adjust the volume, pan, transpose, detune, glide, and phase of the layer by using the knobs and the menus in the layer section.
Split or combine the layers by using the layer mode buttons in the layer section.
By using these steps, you can create different sounds for each layer and mix them together to create a final sound. You can also copy, paste, swap, or randomize the layers by using the layer menu in the layer section.
The 14 different synthesis methods of Tone2 ElectraX VSTi v1.2.x64
Another important feature of Tone2 ElectraX VSTi v1.2.x64 is that it offers 14 different synthesis methods that can be used for each layer. Each synthesis method has its own sound characteristics, parameters, and options. This means that you can create a wide variety of sounds by using different synthesis methods for each layer.
To use the 14 different synthesis methods of Tone2 ElectraX VSTi v1.2.x64, you need to do the following:
Select a layer by clicking on its name (A, B, C, or D) in the layer section.
Choose a synthesis method for the layer by clicking on the synthesis mode button in the layer section.
Edit the sound of the layer by using the synthesis section and its tabs.
Here is a brief description of each synthesis method and its tabs:
Synthesis method
Description
Tabs
Virtual analog
This synthesis method emulates the sound of classic analog synthesizers. It uses two oscillators that can generate various waveforms, such as saw, pulse, triangle, sine, noise, etc. It also has a sub-oscillator, a ring modulator, a sync option, and a drift option.
Oscillator 1, Oscillator 2, Sub/Ring/Sync/Drift
FM
This synthesis method uses frequency modulation to create complex and harmonic sounds. It uses four operators that can modulate each other's frequencies. It also has a feedback option, a ratio option, and a fine tuning option.
Operator 1, Operator 2, Operator 3, Operator 4
Wavetable
This synthesis method uses wavetables to create dynamic and evolving sounds. It uses two wavetable oscillators that can scan through different waveforms. It also has a warp option, a morph option, and a phase option.
Wavetable 1, Wavetable 2, Warp/Morph/Phase
Phase distortion
This synthesis method uses phase distortion to create warm and rich sounds. It uses two phase distortion oscillators that can generate various waveforms, such as saw, pulse, triangle, sine, noise, etc. It also has a phase modulation option, a sync option, and a drift option.
Oscillator 1, Oscillator 2, Phase Mod/Sync/Drift
Sample playback
This synthesis method uses samples to create realistic and natural sounds. It uses two sample oscillators that can load any WAV or AIFF file. It also has a loop option, a reverse option, and a start/end option.
Sample 1, Sample 2, Loop/Reverse/Start/End
Physical modeling
This synthesis method uses physical modeling to create acoustic and organic sounds. It uses two physical modeling oscillators that can simulate various instruments, such as strings, brass, woodwinds, plucked, bowed, etc. It also has a damping option, a noise option, and a breath option.
Model 1, Model 2, Damping/Noise/Breath
Additive
This synthesis method uses additive synthesis to create harmonic and inharmonic sounds. It uses two additive oscillators that can generate up to 256 partials each. It also has a spectrum option, a morph option, and a phase option.
Additive 1, Additive 2, Spectrum/Morph/Phase
Resynthesis
This synthesis method uses resynthesis to create new sounds from existing sounds. It uses two resynthesis oscillators that can analyze and recreate any WAV or AIFF file. It also has a warp option, a morph option, and a phase option.
Resynthesis 1, Resynthesis 2, Warp/Morph/Phase
Vocoder
This synthesis method uses vocoding to create robotic and vocal sounds. It uses two vocoder oscillators that can modulate the frequency spectrum of one sound with another sound. It also has a bands option, a formant option, and a noise option.
Vocoder 1, Vocoder 2, Bands/Formant/Noise
Sync granular
This synthesis method uses sync granular synthesis to create granular and glitchy sounds. It uses two sync granular oscillators that can chop and rearrange any WAV or AIFF file. It also has a grain size option, a grain shape option, and a grain position option.
Sync Granular 1, Sync Granular 2, Grain Size/Shape/Position
Fractal synthesis
This synthesis method uses fractal synthesis to create chaotic and noisy sounds. It uses two fractal oscillators that can generate self-similar patterns of sound. It also has a feedback option, a chaos option, and a filter option.
Fractal 1, Fractal 2, Feedback/Chaos/Filter
Ultra-saw
This synthesis method uses ultra-saw synthesis to create fat and wide sounds. It uses two ultra-saw oscillators that can generate up to 18 sawtooth waves each. It also has a detune option, a spread option, and a phase option.
Ultra-saw 1, Ultra-saw 2, Detune/Spread/Phase
Wave-shaping
This synthesis method uses wave-shaping synthesis to create distorted and harmonious sounds. It uses two wave-shaping oscillators that can apply various shapes and curves to the input signal. It also has a drive option, a bias option, and a filter option.
Wave-shaping 1, Wave-shaping 2, Drive/Bias/Filter
Noise
This synthesis method uses noise synthesis to create atmospheric and percussive sounds. It uses two noise oscillators that can generate various types of noise, such as white, pink, brown, blue, violet, etc. It also has a color option, a filter option, and a stereo option.
Noise 1, Noise 2, Color/Filter/Stereo
By using these synthesis methods and their tabs, you can create different sounds for each layer and mix them together to create a final sound. You can also import your own samples or wavetables into some of the synthesis methods.
The modulation matrix and the arpeggiator of Tone2 ElectraX VSTi v1.2.x64
Another important feature of Tone2 ElectraX VSTi v1.2.x64 is that it has a huge modulation matrix and an advanced arpeggiator that can add movement and variation to your sounds. The modulation matrix allows you to modulate any parameter of the plugin with any source, such as envelopes, LFOs, MIDI controllers, velocity, pitch bend, etc. The arpeggiator allows you to create complex and rhythmic patterns with your sounds using various modes, steps, directions, speeds, etc.
To use the modulation matrix and the arpeggiator of Tone2 ElectraX VSTi v1.2.x64, you need to do the following:
Select a layer by clicking on its name (A, B, C, or D) in the layer section.
Click on the mod matrix tab in the layer section.
Select a source from the source menu in the modulation matrix.
Select a destination from the destination menu in the modulation matrix.
Adjust the amount of modulation by using the amount knob in the modulation matrix.
Repeat steps 3-5 for as many modulations as you want.
Click on the arp tab in the layer section.
Select an arpeggiator mode from the mode menu in the arpeggiator.
Edit the arpeggiator pattern by using the step buttons and knobs in the arpeggiator.
Adjust the speed, direction, octave range, swing, gate time, and glide time of the arpeggiator by using the knobs and menus in the arpeggiator.
Repeat steps 7-10 for as many layers as you want.
By using these steps, you can create dynamic and expressive sounds with Tone2 ElectraX VSTi v1.2.x64. You can also save your own arpeggiator presets and share them with other users.
The effects section and the master section of Tone2 ElectraX VSTi v1.2.x64
Another important feature of Tone2 ElectraX VSTi v1.2.x64 is that it has a high-quality effects section and a master section that can enhance and polish your sounds. The effects section allows you to apply over 40 effects to each layer or to the master output of the plugin. The master section allows you to control the global settings and the output of the plugin. The effects section and the master section have their own tabs, knobs, buttons, and menus that allow you to access different features and parameters. Here is a brief overview of each section:
Section
Description
The effects section
This section lets you apply over 40 high-quality effects to each layer or to the master output of Tone2 ElectraX VSTi v1.2.x64. You can access different tabs for each effect type, such as reverb, delay, chorus, flanger, phaser, distortion, filter, EQ, compressor, limiter, gate, bitcrusher, enhancer, stereo widener, and more. You can adjust the parameters of each effect, such as time, feedback, depth, rate, mix, drive, frequency, gain, threshold, ratio, etc. You can also modulate the effects using the modulation matrix or the LFOs.
The master section
This section lets you control the global settings and the output of Tone2 ElectraX VSTi v1.2.x64. You can access different tabs for the master settings, such as polyphony, pitch bend, velocity curve, MIDI learn, etc., and for the master output, such as volume, pan, EQ, limiter, etc. You can also access the sound browser and the wavetable editor from this section.
By using these sections and their features, you can enhance and polish your sounds with Tone2 ElectraX VSTi v1.2.x64. You can also save your own effects presets and share them with other users.
How to get the most out of Tone2 ElectraX VSTi v1.2.x64
Tone2 ElectraX VSTi v1.2.x64 is a very powerful and flexible synthesizer plugin that can create amazing sounds for any genre and style of music. However, to get the most out of this plugin, you need to know some tips and tricks that can help you improve your workflow and your creativity. In this section, we will show you some tips and tricks on how to get the most out of Tone2 ElectraX VSTi v1.2.x64.
The presets and the sound browser of Tone2 ElectraX VSTi v1.2.x64
One of the best ways to get the most out of Tone2 ElectraX VSTi v1.2.x64 is to use its presets and its sound browser. The plugin comes with a huge library of over 1300 presets and 3000 sounds that cover a wide range of genres and styles. You can use these presets and sounds as they are or as a starting point for your own sounds.
To use the presets and the sound browser of Tone2 ElectraX VSTi v1.2.x64 , you need to do the following:
Click on the sound browser button in the master section.
Select a category from the category menu in the sound browser.
Select a subcategory from the subcategory menu in the sound browser.
Select a preset or a sound from the preset list or the sound list in the sound browser.
Click on the load button or double-click on the preset or the sound to load it into the plugin.
Edit the preset or the sound as you wish by using the layer section, the synthesis section, the effects section, and the master section.
Save your own preset by clicking on the save button in the sound browser.
By using these steps, you can access and use thousands of presets and sounds with Tone2 ElectraX VSTi v1.2.x64. You can also search for presets and sounds by using the search box in the sound browser.
The custom waveforms and the wavetable editor of Tone2 ElectraX VSTi v1.2.x64
Another way to get the most out of Tone2 ElectraX VSTi v1.2.x64 is to use its custom waveforms and its wavetable editor. The plugin allows you to import your own waveforms or wavetables into some of its synthesis methods, such as wavetable, resyn